Healthcare MEP contractor for imaging and clinical rooms
Imaging equipment has MEP demands that a standard scope does not cover: dedicated earthing, EMI-aware cable routes, medical gases, and HVAC that holds tight temperature and humidity limits. We deliver them in step with the shielding, so every penetration is planned once.
Why MEP and shielding belong together
Every pipe, duct and cable that crosses a shielded wall is a potential leak in the shield. On an MRI suite it must pass through a waveguide or filter; in a lead-lined room it needs a lead-backed sleeve or box.
When shielding and MEP are separate packages, those details are discovered late and fixed on site. Under one contractor they are drawn once, before anything is cut.
Where it is used
- MRI suites
- CT and PET-CT rooms
- X-ray rooms
- Controlled clinical environments
What we deliver
- Medical gas pipeline systems: oxygen, medical air and vacuum
- Electrical infrastructure and earthing for imaging equipment
- EMI/RFI-aware cable routing and containment
- HVAC design and installation for controlled clinical environments
- Coordination with OEM installation teams during commissioning
- MEP shop drawings and as-built documentation
How we deliver it
Agree loads and routes
We take heat loads, power and service requirements from the OEM and agree routes with the design team.
Plan every penetration
Each crossing of the shielded envelope is located, detailed and sealed on the drawings first.
Install and test
Services are installed, pressure-tested and balanced to the specified conditions.
Document
As-built drawings and test records are handed over with the room.
Related disciplines
Radiation & magnetic shielding
Lead lining for CT, PET-CT and X-ray rooms; RF and magnetic shielding for MRI suites — built to the OEM and physicist specification.
Medical doors & access
Lead-lined and RF-shielded doors, hermetic sliding doors and access control — fabricated and fitted to seal controlled clinical areas.
Infection-control surfaces & joinery
Seamless, non-porous Corian solid surfaces and medical-grade joinery from our own factory, made for clinical cleaning protocols.
Planning an MRI, CT or PET-CT room?
Send us the equipment model and the site, and we will tell you what the room needs and how we would deliver it.