Radiation and magnetic shielding contractor in Saudi Arabia
We build the protective envelope around diagnostic and therapy rooms: lead lining for ionising radiation, and RF (Faraday cage) and magnetic shielding for MRI. Every layer is built to the OEM site-planning guide and the radiation protection physicist’s report.
Two different problems, two different shields
Ionising radiation — from CT, PET-CT and X-ray equipment — is stopped by dense material, usually lead. How much is needed is calculated by a radiation protection physicist for each wall, floor, ceiling, door and window.
MRI uses no ionising radiation. Its room is shielded against radio-frequency interference by a continuous conductive envelope, and sometimes against the magnet’s fringe field with steel. The OEM’s site-planning guide defines both.
Where it is used
- MRI suites
- CT rooms
- PET-CT suites
- X-ray and fluoroscopy rooms
- Nuclear medicine rooms
- Radiation therapy vaults
What we deliver
- MRI suites with RF (Faraday cage) and magnetic shielding
- Lead-lined walls, ceilings and floors for CT, PET-CT and X-ray rooms
- Nuclear medicine rooms and radiation therapy vaults
- Lead-glass viewing windows and RF windows
- Continuous-lining details at junctions, boxes and penetrations
- Retrofit shielding for existing diagnostic rooms
How we deliver it
Review the specification
We read the OEM site-planning guide and the physicist’s shielding report side by side and resolve conflicts before drawings are issued.
Detail the envelope
Shop drawings show every lining layer, seam, junction and penetration, so nothing is improvised on site.
Build and inspect
Our own crews install the shielding, and continuity is checked before finishes close it in.
Test and hand over
We support the RF attenuation test or the radiation survey, then release the room to the OEM installation team.
Related disciplines
Medical doors & access
Lead-lined and RF-shielded doors, hermetic sliding doors and access control — fabricated and fitted to seal controlled clinical areas.
Healthcare MEP
Mechanical, electrical and plumbing works engineered for imaging equipment — medical gases, earthing, EMI-aware routing and controlled-environment HVAC.
Infection-control surfaces & joinery
Seamless, non-porous Corian solid surfaces and medical-grade joinery from our own factory, made for clinical cleaning protocols.
Planning an MRI, CT or PET-CT room?
Send us the equipment model and the site, and we will tell you what the room needs and how we would deliver it.