X-ray and fluoroscopy room construction contractor in Saudi Arabia
We build general radiography and fluoroscopy rooms to the radiation protection physicist’s report and the equipment manufacturer’s guide, from the lead lining and shielded door to the warning signage and the supports the equipment needs.
What goes into an X-ray room
A general X-ray (radiography) room is the simplest shielded imaging room, but the details still matter. The X-ray tube produces a beam directed at the patient and detector, so the walls, door and viewing window around it are lead-lined to the physicist’s specification, and the operator works from a protected control area or behind a lead screen. Fluoroscopy rooms, used for live imaging during procedures, need the same protection and often more of it. The door is lead-lined, and an illuminated warning sign outside shows when X-rays are on. EGC builds X-ray and fluoroscopy rooms from the shielding report and the equipment manufacturer’s guide, with the lead lining, lead-glass window, door, warning signage and the provisions for the equipment’s ceiling and wall supports, and supports the radiation survey before the room is used.
Because the room is used all day, the door and the wipe-clean surfaces matter as much as the lead lining.
Rooms we build
- General radiography rooms
- Fluoroscopy rooms
- Procedure and interventional rooms
- Other diagnostic X-ray rooms
What we build
- Lead-lined walls, ceiling and floor where specified
- Lead-lined door with warning light and signage
- Lead-glass viewing window and shielded control area
- Lead-backed boxes and sleeves for services
- Provisions for ceiling and wall equipment supports
- Clean, durable finishes for daily clinical use
How we deliver it
Read the report
We work from the physicist’s shielding report and the equipment manufacturer’s guide.
Detail the lining
Every junction, box and penetration is drawn before work starts.
Build and inspect
Our crews install and check the lining, door and window.
Survey and hand over
We support the radiation survey, then release the room.
Related services
Radiation & magnetic shielding
Lead lining for CT, PET-CT and X-ray rooms; RF and magnetic shielding for MRI suites — built to the OEM and physicist specification.
Medical doors & access
Lead-lined and RF-shielded doors, hermetic sliding doors and access control — fabricated and fitted to seal controlled clinical areas.
CT Room Construction
Lead lining, lead-glass window, shielded door and warning light, to the physicist’s report.
Infection-control surfaces & joinery
Seamless, non-porous Corian solid surfaces and medical-grade joinery from our own factory, made for clinical cleaning protocols.
Healthcare MEP
Mechanical, electrical and plumbing works engineered for imaging equipment — medical gases, earthing, EMI-aware routing and controlled-environment HVAC.
Planning an X-ray room?
Send us the equipment model and the shielding report and we will tell you how we would build it.